JYJ-50C 10~1/0 AWG cable lug crimping tools

Crimping  6~50 mm2 / 10~1/0 AWG Non-insulated connector

Model:JYJ-50C 

Crimping material:Non-insulated connector

Crimping Range: 6~50 mm2

6mm2  : 10AWG,  10mm2  : 7AWG, 16mm2  : 5AWG,

25mm2  : 3AWG,  35mm2  : 2AWG, 50mm2  : 1/0AWG,  

Size: 390*130*45 mm 

Weight: 1.3kg

Operation

1. Remove the cable insulation according to the instructions supplied with each lug or splice. Do not cut or nick the individual strands.

2. Open the tool to its widest point and press the die control button.

3. Select the proper die setting by rotating the die, matching the cable size and color coded connector with thesize on the die. Release the buttontoreturn to its original position. Repeat this process for the opposite die. Both dies should match. 

4. Insertthe appropriate connector with cable between the die set and crimp. Open the tool and take out the component.

Cautionance

1. Do not extend handles.

2. Do not use this tool beyond its crimping capacity (7-4/0 AWG).

3. Use a light application of anti-rust oil or grease to coat the surface of the blade edges while crimper is not in use.

Maintenance

1. Do not drop or use the crimper to strike objects.

2. Do not store crimper in a wet or damp location.

3. Do not store or usein or near any sulfuric acid or corrosio gas  

4. Check the screws of the cover plate to ensure thatnone are loose.